Coollaboratory Liquid Ultra

Coollaboratory Liquid Ultra er den nyeste generation af Coollaboratorys suveræne kølepasta lavet på flydende metal!

Påføringen er nu blevet endnu nemmere med de medfølgende pensler, og du kan nu gøre det på normalt 30-60 sekunder!

Se video af hvordan du påfører det her
Se video af hvordan du renser Liquid Ultra af her

Producentens beskrivelse:
After the overwhelming success of the Liquid Pro, the new Coollaboratory Liquid Ultra was developed. Of course the Liquid Ultra is also made of 100% metal, but it has an absolute new usability and offers an outstanding performance. Due to the paste-like texture the application is now very easy.

The Coollaboratory Liquid Ultra was optimized for highest performance and optimal usability. The thermal compound consists to 100% of metal, but can be applied very easy with a commercial brush. The processor (Heatspreader) should be cleaned thoroughly before apply the Liquid Ultra, in order to eliminate dirt, old thermal compound or fat.

Depending on the size of the Heatspreader, three to four division lines of Liquid Ultra should be applied centrically on the Heatspreader. Then the Liquid Ultra should be disposed slowly and without pressure on the Heatspreader. The less pressure is used when elapsing, the easier the Liquid Ultra can be applied. The Liquid Ultra has a pasty form, whereby the application goes very fast. Please pay attention to coat also the edges of the Heatspreaders. Therefore always use the same brush side. It is usually not necessary to apply more Liquid Ultra again for a commercial processor.


Specifikationer:
Indhold: ca. 1g
Farve: Sølv
Varmeledningsevne: 38.4 W/mK
Densitet: 6,85 g/cm³

Pakken indeholder:
1x Coollaboratory Liquid Ultra
1x Rengøringskit
2x Påføringspensel


OBS - Se her inden brug:
Da produktet består af 100% metal er det ledende. Det betyder også at man ikke må bruge kølere med aluminiumbund sammen med denne pasta, da det får aluminium til at gå i opløsning.

Varenummer: